Activating & Deactivating Honda CR-V Automatic Parking Brake

April 13th, 2018 by

automatic-parking-brake

What does the automatic parking brake do?

The Automatic parking brake is a feature on all 2018 Honda CR-V’s. When enabled, the parking brake will engage automatically every time the vehicle is turned off. It will remained engaged until the vehicle is turned back on and manually disengaged by pressing down on the parking brake lever while depressing the brake pedal. this feature can be turned off on and off depending on what you prefer.

Activating & deactivating the automatic parking brake

follow the 5 simple steps below to activate or deactivate your automatic parking brake.

1: Turn the vehicle on

2: Make sure the vehicle is shifted to park

3: Without depressing the brake pedal. pull up and release the parking brake which is located to the left of the shifter lever.

4: Pull up and hold the parking brake switch. When you hear a beeping sound, release the switch and within 3 seconds pull up and hold the switch again.

5: When you hear a beeping sound the procedure is completed.

• Two beeps indicates that the feature has been activated.

• One beep indicates that the feature has been deactivated.

Now you can release the parking brake and turn the car off to make sure it was properly done, if the parking brake comes back on after the vehicle is turned off you know the automatic parking brake has been activated, Therefore if the parking brake stays off after the vehicle is turned off you know the feature has been deactivated.

Watch the video below to get a better idea of how the automatic parking brake works.

View or Honda CR-V inventory Here