How To Retrieve Your Honda Radio Code

January 19th, 2018 by

Honda Radio Code

Why is my Honda asking for the Honda radio code?

The number one reason your Honda will ask for a radio code is when you replace the battery. Every time the battery is disconnected or becomes completely dead the radio will ask for the code. In most cases you can just press an hold the power button for 2 seconds and the radio will automatically reset and start working properly without entering the code. If this does not work then you will have to enter the Radio Code.

How to retrieve the Honda radio code.

Honda-Radio-Code

• The 1st way to retrieve the radio code is to look in your glove box or owners manual. The code is on a sticker usually stuck or placed on the inside of the glove box. It may also be placed or stuck in the owners manual. This sticker will also have the radio serial number on it as well. To the left is a picture of what it will look like.

• Another way to retrieve the radio code is to bring it to your local Honda dealer and they will be able to take care of it for you.

• If you can’t make it in to a Honda dealer you can also look it up online using the link below

https://radio-navicode.honda.com/

You will need the following information to retrieve the Honda radio code.

• Zip Code

• Phone Number

• Email

• Vin Number

You can find the vin number in several locations such as the driver’s door jam, the bottom of the windshield and on your registration

• Serial #

If you have 2002 or newer Honda turn the vehicle to the on position. Press the preset buttons 1 and 6 at the same time while turning on the radio. A 10 digit serial number will appear on the radio display. If you have a 2001 or older Honda the serial number is located on the body of the radio unit. the radio unit will have to be removed to see the code. At this point you may want to bring the vehicle to your local Honda dealer unless you are confident you can remove and re-install the radio unit without damaging it.

How to Enter in the Honda Radio Code

Once you find or receive the Honda Radio Code just enter it in using the radio preset buttons. The radio should start working properly once you enter in the code.